central-coconut-warraber-yam
eastern-darnley-murray-stephens-yorke
top-western-boigu-dauan-saibai
lower-western-badu-kubin-mabuiag-st-pauls
cross-harbour-ti-horn-hammond-pow
coral-sea-cape-flattery-fitzroy-green-lizard
* ETA’s change due to operational requirements so be sure to check back regularly.
* PC (Pre-Consignment) paid and all AQIS requirements completed. If AQIS clearance isn’t completed, we cannot carry the freight.
* Backload Freight needs to be dropped off as follows:
Tuesday Service
– 3pm Tuesday for vehicles, boats & over-dimensional cargo
– 12pm Wednesday for all other freight
– Ready for collection in Cairns from 11am the following Tuesday
Friday Service
– 12pm Friday for all freight
– Ready for collection in Cairns from 11am the following Friday
* All freight needs to packaged for sea carriage
* Central Island group includes Coconut (Poruma), Warraber (Sue) and Yam (Iama).
* Service is every Friday, unless advised. Schedule is live, please refer to our Website
* Freight is shipped on the Tuesday Service ex-Cairns departing Horn Island every Thursday Evening.
* Horn Island (Ngurupai) is the trans-shipment hub for the freight to travel to the Central Islands on one of the Malu vessels.
* Back-loading needs a Pick-up form, PC (Pre-Consignment paid) and all AQIS requirements completed. If AQIS clearance isn’t completed, we cannot carry the freight.
* All freight to be backloaded (once the above is finalised – Pick Up Form, PC & AQIS Clearance) can only be received at the ramp whilst the vessel is in.
* 10′ containers at 2.5 tonne are the maximum size/weight available to be transported. 20′ containers are not available.
* Ensure at least 4 weeks notice is given for construction projects and any project requirements should be directed to otsioog@seaswift.com.au. Please enquire on Project and Charter Service or email to projects@seaswift.com.au to notify us of your needs.
* For large projects, tug & barge sets are available (TUG and BARGE) from 1,500t to 3,500t dependent on load and destination.
* Eastern Island grouping includes Darnley (Erub), Murray (Mer), Stephens (Ugar) & Yorke (Masig).
*** Denotes weeks when Stephens Island is serviced***
* ETA’s change at short notice due to operational requirements so be sure to check back regularly.
* The Newcastle Bay carries all freight ex Cairns and Horn Island (Ngurupai) is the trans-shipment hub for freight to travel to the Eastern Islands.
* Back-loading needs a Pick-up form, PC (Pre-Consignment paid) and all AQIS requirements completed. If AQIS clearance is required and isn’t completed, we cannot carry the freight.
* All freight to be backloaded (once the above is finalised – Pick Up Form, PC & AQIS Clearance) can only be received at the ramp whilst the vessel is in.
* 10′ containers at 2.5 tonne are the maximum size/weight available to be transported. 20′ containers are not available.
* Ensure at least 4 weeks notice is given for construction projects and any project requirements should be directed to otsioog@seaswift.com.au.
* For large projects tug & barge sets are available (TUG and BARGE) from 1,500t to 3,500t dependent on load and destination.
* Top Western Island grouping includes Boigu (Talbot), Dauan (Mt Cornwallis) and Saibai islands.
* ETA’s change at short notice due to operational requirements so be sure to check back regularly.
* The Newcastle Bay carries all freight ex Cairns and Horn Island (Ngurupai) and is the trans-shipment hub for freight for the Top Western Islands.
*Back-loading needs a Pick-up form, PC (Pre-Consignment paid) and all AQIS requirements completed. If AQIS clearance isn’t completed, we cannot carry the freight.
* All freight to be backloaded (once the above is finalised – Pick Up Form, PC & AQIS Clearance) can only be received at the ramp whilst the vessel is in.
* 10′ containers at 2.5 tonne are the maximum size/weight available to be transported. 20′ containers are not available.
* Ensure at least 4 weeks notice is given for construction projects and any project requirements should be directed to otsioog@seaswift.com.au.
* For large projects tug & barge sets are available (TUG and BARGE) from 1,500t to 3,500t dependent on load and destination.
* The Lower Western Island group includes Badu, Mabuiag and Moa with it’s two communities of Kubin & St Pauls.
* The Newcastle Bay carries all freight ex Cairns. Horn Island (Ngurupai) is the trans-shipment hub for freight for the Lower Western Islands.
* ETA’s change at short notice due to operational requirements so be sure to check back regularly.
* Back-loading needs a Pick-up form, PC (Pre-Consignment paid) and all AQIS requirements completed. If AQIS clearance isn’t completed, we cannot carry the freight.
* All freight to be backloaded (once the above is finalised – Pick Up Form, PC & AQIS Clearance) can only be received at the ramp whilst the vessel is in.
* 10′ containers at 2.5 tonne are the maximum size/weight available to be transported. 20′ containers are not available.
* Ensure at least 4 weeks notice is given for construction projects and any project requirements should be directed to otsioog@seaswift.com.au.
* For large projects tug & barge sets are available (TUG and BARGE) from 1,500t to 3,500t dependent on load and destination.
* The Cross Harbour services runs between Thursday Island (Waiben) and Horn Island (Ngurupai) predominantly but also services Prince of Wales (Murulag) weekly.
*** Denotes weekly run & day
* Please arrive at Depot 20 minutes before departure to complete any paperwork.
* ETA’s change at short notice due to operational requirements so be sure to check back regularly.
* PC (Pre-Consignment paid) and all AQIS requirements completed. If AQIS clearance is required and isn’t completed, we cannot carry the freight.
* All freight to be backloaded (once the above is finalised – Pick Up Form, PC & AQIS Clearance) can only be received at the ramp whilst the vessel is in.
* Ensure at least 4 weeks notice is given for construction projects and any project requirements should be directed to otsioog@seaswift.com.au.
* For large projects tug & barge sets are available (TUG and BARGE) from 1,500t to 3,500t dependent on load and destination.
* Thursday Island (Waiben) is serviced twice weekly ex Cairns and is the main administrative hub for the Torres Strait.
* ETA’s change due to operational requirements so be sure to check back regularly.
* PC (Pre-Consignment paid) and all AQIS requirements completed. If AQIS clearance isn’t completed, we cannot carry the freight.
* All freight to be backloaded (once the above is finalised – Pick Up Form, PC & AQIS Clearance) can only be received at the ramp whilst the vessel is in.
* Ensure at least 4 weeks notice is given for construction projects and any project requirements should be directed to otsioog@seaswift.com.au.
* For large projects tug & barge sets are available (TUG and BARGE) from 1,500t to 3,500t dependent on load and destination.
* ETA’s change due to operational requirements so be sure to check back regularly.
* PC (Pre-Consignment paid).
* All freight to be backloaded can only be received at the ramp whilst the vessel is in.
* Ensure at least 4 weeks notice is given for construction projects and any project requirements should be directed to otsioog@seaswift.com.au.
* For large projects tug & barge sets are available (TUG and BARGE) from 1,500t to 3,500t dependent on load and destination.
* PC (Pre-Consignment paid).
* All freight to be backloaded can only be received at the ramp whilst the vessel is in.
* Ensure at least 4 weeks notice is given for construction projects and any project requirements should be directed to otsioog@seaswift.com.au.
* For large projects tug & barge sets are available (TUG and BARGE) from 1,500t to 3,500t dependent on load and destination.
* ETAs change due to operational requirements so be sure to check back regularly.
* Back-loading needs a Pick-up form, PC (Pre-Consignment paid).
* All freight to be backloaded (once the above is finalised – Pick Up Form, PC & AQIS Clearance) can only be received at the ramp whilst the vessel is in.
* Ensure at least 4 weeks notice is given for construction projects and any project requirements should be directed to otsioog@seaswift.com.au.
* For large projects tug & barge sets are available (TUG and BARGE) from 1,500t to 3,500t dependent on load and destination.
* Back-loading needs a Pick-up form, PC (Pre-Consignment paid).
* All freight to be backloaded (once the above is finalised – Pick Up Form and PC) can only be received at the ramp on Thursday mornings.
* Ensure at least 4 weeks notice is given for construction projects and any project requirements should be directed to otsioog@seaswift.com.au.
* For large projects tug & barge sets are available (TUG and BARGE) from 1,500t to 3,500t dependent on load and destination.
ETA’s change due to operational requirements so be sure to check back regularly.
Receivals Open 8am – 4pm Mon-Fri Excluding Public Holidays.
Freezer/Chiller to be received before 10am on the day.
NT Shipping Schedule
- Receivals Open 8am – 4pm Mon-Fri Excluding Public Holidays.
- Freezer/Chiller to be received before 10am on the day.
NT Shipping Schedule
- Receivals Open 8am – 4pm Mon-Fri Excluding Public Holidays.
- Freezer/Chiller to be received before 10am on the day.
NT Shipping Schedule
- Receivals Open 8am – 4pm Mon-Fri Excluding Public Holidays.
- Freezer/Chiller to be received before 10am on the day.
Receivals Open 8am – 4pm Mon-Fri Excluding Public Holidays.
Freezer/Chiller to be received before 10am on the day.
Receivals Open 8am – 4pm Mon-Fri Excluding Public Holidays.
Freezer/Chiller to be received before 10am on the day.
Receivals Open 8am – 4pm Mon-Fri Excluding Public Holidays.
Freezer/Chiller to be received before 10am on the day.
Receivals Open 8am – 4pm Mon-Fri Excluding Public Holidays.
Freezer/Chiller to be received before 10am on the day.
